Cascaide® Combination Emergency Shower and Eyewash, 30 GPM, ABS Showerhead and ABS Bowl

Product Description

Cascaide® Combination Emergency Shower & Eyewash Station – CC2251

The Cascaide® CC2251 is a commercial-grade combination emergency shower and eyewash station engineered for free-standing, floor-mounted installation in industrial and commercial exposure areas. Self-adjusting regulation at the shower and eyewash outlets supports ANSI Z358.1 certified performance while maintaining controlled, non-injurious flushing across typical facility supply pressures.

Highlights

• Integrated emergency shower and eyewash coverage in one fixed station
• ANSI Z358.1 certified combination shower/eyewash performance
• ANSI certified per manufacturer specification
• Self-adjusting regulation for stable, non-injurious discharge patterns
• High-capacity 30 gpm regulated shower output for full-body drenching
• Schedule 40 hot dip galvanized piping with SST valves and high-visibility ABS components

Built for commercial and industrial environments

Permanent, plumbed emergency flushing equipment is typically specified where chemical contact, splash, or airborne particulate exposure is part of normal operations. The CC2251 provides a standardized configuration that supports consistent installation geometry, predictable activation, and documented flow performance for EHS and facility teams.

Typical installation areas include:

• Chemical processing and mixing locations
• Plating, finishing, and parts washing lines
• Bulk transfer points, drum handling zones, and IBC staging
• Battery maintenance and charging rooms
• Laboratories, pilot plants, and QA/QC environments
• Wastewater treatment, utility corridors, and maintenance shops

One station. Two critical emergency functions.

Combination stations are specified when a hazard assessment requires both:

• Full-body drenching to rinse contaminants from skin and clothing, and
• Dedicated eyewash flushing for localized eye exposure response

The CC2251 uses self-adjusting regulators to deliver the specified shower and eyewash flows while maintaining a dispersed, non-injurious stream from each outlet.

ANSI Z358.1 performance + ANSI certification

The Cascaide® CC2251 is specified as an ANSI Z358.1 certified combination emergency shower and eyewash station and is identified as ANSI certified in the manufacturer documentation. The specification also excludes designs that produce improper flow patterns or rely on screens or filters that can deteriorate over time, supporting consistent inspection and maintenance outcomes.

Designed for the required emergency duration

With proper installation and adequate water supply, the CC2251 is specified to provide a non-injurious stream of water for 15 minutes or longer.

Construction and performance details

• Shower flow rate: 30 gpm (113.56 L/min) @ 30-70 psi (206.84-482.63 kPa) flowing pressure via self-adjusting regulation
• Eyewash flow rate: 2.40 gpm (9.08 L/min) @ 30-70 psi total via two 1.20 gpm (4.54 L/min) regulators
• Shower head: Yellow UV-resistant ABS plastic showerhead delivering a minimum 20″ (50.80 cm) diameter pattern to the target area 60″ (152.40 cm) above standing level
• Eyewash heads: Solvent-resistant yellow acetal dual-stream heads with integral hinged covers on a chrome-plated brass wye assembly
• Bowl: ABS Yello-Bowl® positioned beneath the eyewash heads with drain connection only
• Piping: Schedule 40 hot dip galvanized steel
• Valves: SST stay-open ball valves with SST balls and stems (1″ shower, 1/2″ eyewash)
• Activation: SST pull rod assembly (shower) and SST push plate with actuation graphic (eyewash)
• Mounting: Free-standing with flanged floor mounting plate
• Supply connection: 1″ NPT (installer-selected location at top, mid-point, or bottom near the eyewash)
• Waste connection: 1″ NPT

FAQs

What equipment configuration does the CC2251 provide?

The CC2251 is a plumbed combination station that integrates an emergency shower with a dual-head eyewash on a free-standing, floor-mounted assembly.

What flow rates are specified for the shower and eyewash?

The self-adjusting regulated shower is specified at 30 gpm and the regulated eyewash is specified at 2.40 gpm total at 30-70 psi flowing pressure.

How is compliance and certification documented for this model?

Manufacturer documentation specifies ANSI Z358.1 certified performance and lists the CC2251 as ANSI certified for record retention and inspection support.

Specifications

Resources