Cascaide® Combination Emergency Shower and Eyewash, 30 GPM, ABS Showerhead and Stainless Steel Bowl

Product Description

Cascaide® Combination Emergency Shower & Eyewash Station – CC2261

The Cascaide® CC2261 is a commercial-grade combination emergency shower and eyewash station for free-standing, floor-mounted installation. Self-adjusting regulation supports ANSI Z358.1 certified flow, including a 30 gpm shower outlet and a Type 304 Stainless Steel eyewash bowl.

Highlights

• Integrated emergency shower and eyewash on one station
• ANSI Z358.1 certified combination performance
• Self-adjusting regulators deliver a non-injurious flushing stream
• Free-standing design with flanged floor mounting plate
• Galvanized Schedule 40 piping, SST valves, and high-visibility yellow ABS and acetal components

Built for commercial and industrial environments

Emergency response equipment is specified to activate immediately and operate consistently across the site. The CC2261 is a fixed-configuration combination unit that supports standardized installation geometry and repeatable flushing performance across common supply pressures.

Typical installation locations include:

• Chemical handling, storage, and dispensing areas
• Metal finishing, plating, and parts washing lines
• Battery service rooms and charging stations
• Process rooms, pilot plants, and utilities
• Industrial maintenance shops and mechanical spaces
• Waste handling and washdown zones identified by your hazard assessment

One station. Two critical emergency functions.

Combination equipment is specified when the hazard analysis requires both of the following capabilities:

• Full-body drenching to rinse hazardous substances from skin and clothing, and
• Eyewash flushing for immediate response to eye exposure incidents

The CC2261 uses self-adjusting regulation at the showerhead and eyewash outlets to maintain the specified discharge while keeping the spray pattern controlled for emergency flushing.

ANSI Z358.1 performance + ANSI certification

The Cascaide® CC2261 is specified as ANSI Z358.1 certified and is listed as ANSI certified in the manufacturer documentation. The specification excludes units with improper flow patterns or deteriorating screens or filters to support reliable inspection outcomes.

Designed for the required emergency duration

With proper installation and adequate water supply, the CC2261 is specified to provide a non-injurious stream of water for 15 minutes or longer.

Construction and performance details

• Shower flow rate: 30 gpm (113.56 L/min) @ 30-70 psi flowing pressure
• Eyewash flow rate: 2.40 gpm (9.08 L/min) total @ 30-70 psi via two 1.20 gpm (4.54 L/min) regulators
• Shower head: Yellow UV-resistant ABS showerhead with a minimum 20″ (50.80 cm) diameter pattern at 60″ (152.40 cm) above standing level
• Eyewash heads: Solvent-resistant yellow acetal dual-stream heads with hinged covers on a chrome-plated brass wye
• Bowl: Type 304 Stainless Steel bowl located beneath the eyewash heads with drain opening
• Piping: Schedule 40 hot dip galvanized steel
• Valves: SST stay-open ball valves with SST balls and stems (1″ shower, 1/2″ eyewash)
• Activation: SST pull rod (shower) and SST push plate with actuation graphic (eyewash)
• Mounting: Free-standing with flanged floor mounting plate
• Supply connection: 1″ NPT; location selected by installer (top, mid-point, or bottom near the eyewash)
• Waste connection: 1″ NPT

FAQs

What configuration does the CC2261 use?

The CC2261 is a plumbed combination station that integrates a regulated emergency shower and a regulated dual-head eyewash on one free-standing assembly.

What compliance standard is specified for CC2261 performance?

The manufacturer specification lists the CC2261 as certified with ANSI Z358.1 for combination shower and eyewash stations.

How is certification identified for this model?

Manufacturer documentation lists the CC2261 as ANSI certified.

Specifications

Resources