Cascaide® Floor Mounted Emergency Shower, 30 GPM, ABS Showerhead

Product Description

Cascaide® Floor Mounted Emergency Shower – CC1001

For exposure areas where immediate whole-body flushing is required, a dedicated emergency shower must deliver a reliable spray pattern and a consistent discharge rate with simple, single-motion activation. The Cascaide® CC1001 is a free-standing, floor mounted emergency shower specified for permanent, plumbed installation and third party certified to ANSI Z358.1 performance requirements.

Highlights

• Free-standing, floor mounted emergency shower for full-body drenching response
• Third party certified to ANSI Z358.1
• Regulated shower output: 30 gpm (113.56 lpm) @ 30/70 psi (206.84/482.63 kPa) flowing pressure
• Self-adjusting regulator helps maintain a constant flow and pattern under varying hydraulic conditions
• High visibility yellow UV resistant ABS showerhead
• Schedule 40 hot dip galvanized piping with a flanged floor mounting plate for free-standing installation

Free-standing floor mounted configuration

Floor mounted emergency showers are commonly specified where a fixed, permanent emergency response point is required and installation planning benefits from a free-standing format. The CC1001 includes a flanged floor mounting plate and Schedule 40 hot dip galvanized piping to support consistent installation geometry and straightforward inspection for EHS and facility teams.

Typical installation locations include:

• Chemical processing and material handling areas
• Production lines with splash exposure potential
• Maintenance shops, washdown areas, and utility spaces
• Battery service and charging locations
• Transfer points and dispensing stations identified by the hazard assessment

ANSI Z358.1 certified emergency shower performance

Third party certified to ANSI Z358.1, the CC1001 is specified to deliver a non-injurious stream of water for 15 minutes or longer when installed and supplied as required. The showerhead includes a self-adjusting 30 gpm regulator designed to help assure a consistent flow and spray pattern at 30/70 psi (206.84/482.63 kPa) flowing pressure.
 

Controlled spray pattern with regulated 30 gpm discharge

The shower head must deliver a minimum 20” (50.80 cm) diameter pattern to the target area 60” (152.40 cm) above standing level. Shower units that provide improper flow pattern are not acceptable.
 

Construction and performance details

• Shower flow rate: 30 gpm (113.56 lpm) @ 30/70 psi (206.84/482.63 kPa) flowing pressure
• Emergency duration: Non-injurious stream specified for 15 minutes or longer (upon installation)
• Showerhead: UV resistant high visibility yellow ABS plastic showerhead
• Regulator: Self-adjusting 30 gpm (113.56 lpm) regulator
• Spray pattern: Minimum 20” (50.80 cm) diameter pattern to the target area 60” (152.40 cm) above standing level
• Piping: Schedule 40 hot dip galvanized steel
• Mounting: Flanged floor mounting plate for free-standing installation
• Valve: 1” nickel chrome plated (NCP) single motion activation stay open ball valve with chrome plated ball, SST valve stem, SST pull rod assembly, and SST actuator
• Supply connection: 1” NPT

FAQs

Is the CC1001 a combination shower and eyewash station?

No. The CC1001 is a dedicated emergency drench shower and does not include an eyewash assembly.

What makes the CC1001 different from a wall mounted emergency shower?

The CC1001 is configured for free-standing, floor mounted installation using a flanged floor mounting plate and Schedule 40 hot dip galvanized piping.

What performance is specified for the CC1001?

The CC1001 is specified to deliver 30 gpm (113.56 lpm) at 30/70 psi (206.84/482.63 kPa) flowing pressure and provide a non-injurious stream for 15 minutes or longer when properly installed.

Does the CC1001 meet ANSI Z358.1?

Yes. The CC1001 is third party certified to ANSI Z358.1.

Specifications

Resources