Cascaide® Wall Mounted Emergency Eyewash, 2.4 GPM, ABS Yello-Bowl® with Stainless Steel Wall Bracket

Product Description

Cascaide® Wall Mounted Emergency Eyewash – CC02110

In exposure areas where eye hazards are present, a dedicated plumbed eyewash must deliver a controlled, non-injurious flushing stream with simple, single-motion activation. The Cascaide® CC02110 is a wall mounted emergency eyewash station featuring a high-visibility ABS Yello-Bowl® and SST wall bracket, specified for regulated performance and third party certified to ANSI Z358.1.

Highlights

• Wall mounted emergency eyewash station with ABS Yello-Bowl® and SST wall bracket
• Third party certified to ANSI Z358.1
• Regulated eyewash output: 2.40 gpm (9.08 lpm) @ 30/70 psi (206.84/482.63 kPa) flowing pressure
• Self-adjusting regulator supports a constant and even dual-stream flow pattern
• Solvent-resistant acetal eyewash heads with integral hinged covers to help inhibit dust/contamination when not in use
• Includes SST actuator with actuation graphic and a 7" x 11" (17.78 cm x 27.94 cm) safety sign

Wall mounted eyewash for industrial and commercial hazard areas

Plumbed eyewash equipment is typically specified where chemical splash, airborne particulate, or process exposure can affect the eyes and immediate flushing is required. The CC02110 is configured for wall mounting and provides a standardized eyewash point with documented discharge performance and durable operating components for routine inspection and response readiness.

Common installation locations include:

• Chemical handling and dispensing areas
• Laboratories, QA/QC spaces, and pilot process rooms
• Maintenance shops and washdown zones
• Battery service areas and utility rooms
• Production cells where eye hazard exposure is identified by the hazard assessment

ANSI Z358.1 certified performance with regulated dual-stream flow

Third party certified to ANSI Z358.1, the CC02110 is specified to deliver 2.40 gpm (9.08 lpm) at 30/70 psi (206.84/482.63 kPa) flowing pressure and provide a non-injurious stream for 15 minutes or longer when properly installed and supplied. A self-adjusting regulator is specified to help assure a constant and even dual-stream flow pattern under varying hydraulic conditions.
 

Designed to support inspection and reliable use

The eyewash heads include integral hinged covers to help inhibit dust and/or contamination when not in use. Eyewash units with deteriorating screens/filters are not acceptable. The supply for the unit will be installed above the drain, eliminating backflow opportunity.
 

Wheelchair accessible installation (when mounted as instructed)

When installed at the recommended mounting height according to the manufacturer’s instructions, the unit will be wheelchair accessible.
 

Construction and performance details

• Eyewash flow rate: 2.40 gpm (9.08 lpm) @ 30/70 psi (206.84/482.63 kPa) flowing pressure
• Emergency duration: Non-injurious stream specified for 15 minutes or longer
• Piping: 1/2" chrome plated brass
• Valve: 1/2" bronze chrome plated (BCP) single motion activation stay open ball valve with chrome plated ball and SST components
• Actuation: SST actuator / push plate with actuation graphic
• Eyewash heads: Solvent-resistant acetal dual stream heads with integral hinged covers on chrome plated brass wye assembly
• Bowl: High visibility ABS plastic Yello-Bowl® with SST wall mount bracket
• Regulator: Self-adjusting 2.40 gpm (9.08 lpm) regulator
• Supply connection: 1/2" NPT
• Waste connection: 1" NPT

FAQs

Is the CC02110 a combination shower and eyewash station?

No. The CC02110 is a dedicated emergency eyewash and does not include an emergency shower.

What flow output is specified for the CC02110 eyewash?

The CC02110 is specified to deliver 2.40 gpm (9.08 lpm) at 30/70 psi (206.84/482.63 kPa) flowing pressure with a regulated, even dual-stream pattern.

Is this eyewash station wheelchair accessible?

When installed at the recommended mounting height according to the manufacturer’s instructions, the unit will be wheelchair accessible.

Does the CC02110 meet ANSI Z358.1?

Yes. The CC02110 is third party certified to ANSI Z358.1.

Specifications

Resources