Cascaide® Wall Mounted Emergency Eyewash, 2.4 GPM, Type 304 Stainless Steel Bowl with Wall Bracket

Product Description

Cascaide® Wall Mounted Emergency Eyewash – CC02210

Where eye hazards exist, a dedicated plumbed eyewash must activate immediately and provide a controlled flushing pattern that supports emergency response protocols. The Cascaide® CC02210 is a wall mounted emergency eyewash station featuring a Type 304 Stainless Steel bowl and SST wall mounting bracket, specified for regulated performance and third party certified to ANSI Z358.1.

Highlights

• Wall mounted emergency eyewash station with Type 304 Stainless Steel bowl and SST wall bracket
• Third party certified to ANSI Z358.1
• Regulated eyewash output: 2.40 gpm (9.08 lpm) @ 30/70 psi (206.84/482.63 kPa) flowing pressure
• Self-adjusting regulator specified to assure a constant and even dual stream flow pattern
• Solvent-resistant acetal eyewash heads with integral hinged covers to help inhibit dust/contamination when not in use
• Includes SST actuator with actuation graphic and a 7" x 11" (17.78 cm x 27.94 cm) safety sign

Wall mounted eyewash station for exposure areas

Plumbed eyewash stations are commonly specified where chemical splash, airborne particulate, or process exposure can affect the eyes and immediate flushing is required. The CC02210 provides a standardized wall mounted eyewash point with regulated discharge performance and durable operating components to support routine inspection and response readiness.

Typical installation locations include:

• Chemical handling and dispensing areas
• Laboratories, QA/QC environments, and pilot process rooms
• Maintenance shops and washdown zones
• Battery service areas and utility rooms
• Production cells where eye exposure hazards are identified by the hazard assessment

ANSI Z358.1 certified performance with regulated dual streams

Third party certified to ANSI Z358.1, the CC02210 is specified to deliver 2.40 gpm (9.08 lpm) @ 30/70 psi (206.84/482.63 kPa) flowing pressure and provide a non-injurious stream of water for 15 minutes or longer when properly installed and supplied. A self-adjusting regulator is specified to assure a constant and even dual stream flow pattern under varying hydraulic conditions.
 

Designed to support inspection and reliable use

Eyewash covers are provided to inhibit dust and/or contamination when not in use. Eyewash units with deteriorating screens/filters are not acceptable. The supply for the unit will be installed above the drain, eliminating backflow opportunity.
 

Construction and performance details

• Eyewash flow rate: 2.40 gpm (9.08 lpm) @ 30/70 psi (206.84/482.63 kPa) flowing pressure
• Emergency duration: Non-injurious stream specified for 15 minutes or longer
• Piping: 1/2" chrome plated brass
• Valve: 1/2" bronze chrome plated (BCP) single motion activation stay open ball valve with chrome plated ball, SST valve stem, and SST push plate / actuator with actuation graphic
• Eyewash heads: Solvent-resistant acetal dual stream heads with integral hinged covers on chrome plated brass wye assembly
• Bowl: Type 304 Stainless Steel bowl with SST wall mount bracket
• Regulator: Self-adjusting 2.40 gpm (9.08 lpm) regulator
• Supply connection: 1/2" NPT
• Waste connection: 1 1/2" NPT

FAQs

Is the CC02210 a combination shower and eyewash station?

No. The CC02210 is a dedicated emergency eyewash and does not include an emergency shower.

What flow output is specified for the CC02210 eyewash?

The CC02210 is specified to deliver 2.40 gpm (9.08 lpm) at 30/70 psi (206.84/482.63 kPa) flowing pressure with a regulated, even dual stream pattern.

What bowl material is used on the CC02210?

The CC02210 uses a Type 304 Stainless Steel bowl and includes a SST wall mounting bracket.

Does the CC02210 meet ANSI Z358.1?

Yes. The CC02210 is third party certified to ANSI Z358.1.

Specifications

Resources