Cascaide® Wall-Mounted Emergency Shower, 30 GPM, ABS Showerhead

Product Description

Cascaide® Wall Mounted Emergency Shower – CC1000

In areas where whole-body flushing is required for chemical splash or contaminant exposure response, a dedicated emergency shower must activate quickly and maintain a controlled spray pattern across typical facility water pressures. The Cascaide® CC1000 is a wall mounted emergency shower specified for permanent, plumbed installation and third party certified to ANSI Z358.1.

Highlights

• Wall mounted emergency shower for full-body drenching response
• Third party certified to ANSI Z358.1
• Regulated shower output: 30 gpm (113.56 lpm) @ 30/70 psi (206.84/482.63 kPa)
• Self-adjusting regulator supports a consistent flow and pattern under varying hydraulic conditions
• High visibility yellow UV-resistant ABS showerhead
• Schedule 40 hot dip galvanized steel piping with stay-open activation valve

Built for industrial and commercial exposure areas

Wall mounted emergency showers are commonly specified where the installation requires a fixed wall projection and the unit must be positioned directly at the hazard area. The CC1000 is configured as a permanent emergency fixture designed to support predictable activation and documented performance for EHS and facility teams.

Common installation locations include:

• Chemical handling, dispensing, and transfer areas
• Process rooms and utility corridors
• Maintenance shops and washdown zones
• Battery service and charging areas
• Manufacturing cells where splash exposure is identified by the hazard assessment

ANSI Z358.1 certified emergency shower performance

Third party certified to ANSI Z358.1, the CC1000 is specified to deliver a non-injurious stream of water for 15 minutes or longer when properly installed and supplied. The showerhead includes a self-adjusting regulator designed to help maintain a constant flow and pattern at 30/70 psi (206.84/482.63 kPa) flowing pressure.
 

Controlled spray pattern with regulated 30 gpm discharge

The ABS showerhead must deliver a minimum 20” (50.80 cm) diameter pattern to the target area 60” (152.40 cm) above standing level. Shower units that provide improper flow pattern are not acceptable.
 

Construction and performance details

• Shower flow rate: 30 gpm (113.56 lpm) @ 30/70 psi (206.84/482.63 kPa) flowing pressure
• Emergency duration: Non-injurious stream specified for 15 minutes or longer
• Showerhead: UV resistant high visibility yellow ABS plastic showerhead
• Regulator: Self-adjusting 30 gpm (113.56 lpm) regulator
• Spray pattern: Minimum 20” (50.80 cm) diameter pattern to the target area 60” (152.40 cm) above standing level
• Piping: Schedule 40 hot dip galvanized steel
• Valve: 1” nickel chrome plated (NCP) stay open ball valve with chrome plated ball, SST valve stem, and SST pull rod assembly
• Supply connection: 1” NPT

FAQs

Is the CC1000 a combination shower and eyewash station?

No. The CC1000 is a dedicated emergency shower and does not include an eyewash assembly.

What performance is specified for the CC1000?

The CC1000 is specified to deliver 30 gpm (113.56 lpm) at 30/70 psi (206.84/482.63 kPa) flowing pressure and provide a non-injurious stream for 15 minutes or longer when properly installed.

Does the CC1000 meet ANSI Z358.1?

Yes. The CC1000 is third party certified to ANSI Z358.1.

Specifications

Resources