Water Blending Solutions

Mixing Valve for Exposed Assembly of Eye/Facewash 2-9 GPM

ecc-stv-300lf_web

Mixing Valve for Exposed Assembly of Eye/Facewash 2-9 GPM

Our Solid bimetal thermostat directly links to the valve porting to control the intake of hot and cold water and compensate for supply temperature and pressure fluctuations. This is highly responsive and cannot be damaged by extremes in temperature. Encon’s Thermostatic Mixing Valve can be set to the correct temperature for the application.

  • Locking temperature regulator to prevent accidental movement set for 85°F (29°C)
  • Mixing valve will close down on failure of cold water supply
  • Mixing valve with special internal cold water bypass capable of a minimum of 4 GPM (15 l/min) @ 30 PSI (2.1 Bar) upon failure of hot water supply
  • Adjustable high temperature limit stop * set for 90°F (32°C)
  • Integral wall support
  • Sweat ½” top or bottom inlets
  • Threaded ½” top outlet
  • Rough bronze finish
  • Dial thermometer (range 0 to 140°F, -10 to 60°C)
  • A method to assist in achieving compliance to ANSI Z358.1
  • Maximum supply temperature 180 °F (82°C)
  • Maximum supply pressure 125 PSI (8.6 Bar)
Encon's SAF-T-FLO® Fail Safe Blending Systems ensure shower of pre-set, nonadjustable, tempered water blended from location's own water supply. Minimizes hazards, maximizes human comfort and recovery. Up to 60 gpm tepid water output when supplied with sufficient volumes of hot and cold water. Available in 120V/240V, and 30 or 60 GPM options.

Producto # ECC-STV-300LF